A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Mobiles
F9
Bookstore
Tests
Formulary
Seat Remove
Those were the days when you could simply remove the front seat by displacement after removing of detents. Even easier it was for not slidable seats. You had to get out of the car, unhook the seat by lifting
the rear end much more than its front Then hook it back into corresponding holes in accordance with the own body size.
Today you have to be a certified mechanic to do this, because having a side airbag in the seat normally. Incidentally, this also applies to working on a belt adjustment with pyrotechnic pretensioners.
So first move the seat forward electrically or manually and release the rear seat bolts. Then the seat backwards. Before you now also loosen the screws there, disconnect the battery. Wait, first please
read in the operating instructions, whether you may do so and what the consequences are.
The seat is yet attached in front and can be detached now from its cables connected to the body. To avoid that electrical load from your body activates the side airbag try to connect yourself with the
ground potential of the car at a not painted point.
Now the two contacts of the cable to the airbag must either be interconnected, or be connected to a short safety adapter, which prevents triggering final. Only then do the rest of dismounting. Later you
repeat all these steps in reverse order. In the time between the removal of the electrical protection and the reconnection of the battery or switching on the ignition, no person should sit in the vehicle. 07/16
F9